| ● 采用软启动模式及全数字集成电路控制恒流充电、充电更快速、更平稳。 ● 毋需充电限流电阻,避免限流电阻发热引致能量浪费,比普通电容式点焊机节电40%。 ● 采用进口急充放电电容器,容量稳定,寿命长。 ● 数字式充电电压显示,设定充电电压更准确、直观。 ● 用途广泛,特别适用于铝、铜、不锈钢、合金、镍、钨等导电、导热性能好的金属的板、线、丝的焊接及异类金属之间的焊接。 |
产品描述: | 毋需充电限流电阻的电容式点焊机Zui新机型。 ● 采用软启动模式及全数字集成电路控制恒流充电、充电更快速、更平稳。 ● 毋需充电限流电阻,避免限流电阻发热引致能量浪费,比普通电容式点焊机节电40%。 ● 采用进口急充放电电容器,容量稳定,寿命长。 ● 数字式充电电压显示,设定充电电压更准确、直观。 ● 用途广泛,特别适用于铝、铜、不锈钢、合金、镍、钨等导电、导热性能好的金属的板、线、丝的焊接及异类金属之间的焊接。 use the soft start mode and the full digital integrated circuit for control of constant-current charging, the charging is and more stable; no charging current limiting resistance for is required, this can avoid energy waste resulted from heating of current limiting resistor and save 40% electricity compared with ordinary condenser type spot welder. use imported well-known charging and discharging condenser, it has stable capacity and long service life; digital charging voltage display; the setting of charging voltage is more accurate and simple; wide applications, it is particularly suitable for weld joint of plates, cable and wires that are made of materials with good electric and heat conductivity such as aluminum, copper, stainless steel, alloy , nickel and tungsten, etc. and welding between heterogeneous metals. 项目(单位) \\ 型号 | dr-180 | dr-400 | 电源输入 | v | 1φ220 | 1φ220 | 输入功率 | kva | 0.8 | 1.5 | 电容量 | uf | 1800 | 4050 | 贮能量 | j | 180 | 400 | 臂伸尺寸 | mm | 45x180 | 150x80 | 电极行程 | mm | 20 | 30 | 电极压力 | n | 200 | 1000 | 焊接能力 | 铝板二块叠焊 | mm | 0.3+0.3 | 0.6+0.6 | 重量 | 主机 | kg | 30 | 150 | 电容箱 | kg | / | / |
项目(单位) \\ 型号 | dr-800 | dtr-1500 | 电源输入 | v | 1φ220/380 | 1φ220/380 | 输入功率 | kva | 2.5 | 4 | 电容量 | uf | 7875 | 14850 | 贮能量 | j | 800 | 1500 | 臂伸尺寸 | mm | 150x100 | 220x450 | 电极行程 | mm | 30 | 60 | 电极压力 | n | 1500 | 3900 | 焊接能力 | 铝板二块叠焊 | mm | 1.0+1.0 | 1.2+1.2 | 重量 | 主机 | kg | 200 | 300 | 电容箱 | kg | / | / |
项目(单位) \\ 型号 | dtr-3000 | dtr-5000 | 电源输入 | v | 1φ220/380 | 1φ220/380 | 输入功率 | kva | 6 | 8 | 电容量 | uf | 29700 | 49500 | 贮能量 | j | 3000 | 5000 | 臂伸尺寸 | mm | 220x400 | 220x400 | 电极行程 | mm | 60 | 60 | 电极压力 | n | 6100 | 6100 | 焊接能力 | 铝板二块叠焊 | mm | 1.6+1.6 | 2.0+2.0 | 重量 | 主机 | kg | 520 | 600 | 电容箱 | kg | 170 | 200 |
|
|
本产品的品牌是吉欣,型号是DR-5000,驱动形式是电动,电流是直流,频段是中频,焊接原理是冷焊,工作形式是点焊,作用对象是金属,作用原理是脉冲,用途是焊接,电极行程是100mm,额定频率是40KVA,焊接直径是25,Zui大短路电流是62KA,是否提供加工定制是是